We have yet to come across a client that wanted to start a project without having a rough estimate on how much their project will cost. This is only natural and to that end, we created our Commercial Buildout and Renovation Cost Calculator which gives reasonably accurate cost estimates based on your input variables.  All you have to do is to enter the square footage, make a few selections, and voila, your estimated buildout cost is at your disposal. Visit our commercial buildout calculator here.

Dance studio sprung flooring can get very pricy!  Pricing can range from $12 per square foot all the way up to $22 per square foot installed. If you are looking for a cheaper alternative to sprung dance floors, we have solutions starting at $6 per square foot. We have successfully installed dance and gym floors using cut-to-length pool noodles to achieve the sprung effect and it works perfectly!  See pictures below:

​Say you have a warehouse that you want to convert a portion of into office space. Business is growing and you need to take on new hires, and you just don't have the space to accommodate all. Short of moving to a new location altogether, the logical solution would be to convert a portion of your warehouse into new office space, preferably open office space at that.  But wait, that concrete floor looks awful! Not to worry, we have the solution.

​No matter what shape your concrete flooring is in, we at B7 Builders can polish that concrete floor to many levels of shine to meet your requirements. On the low shine spectrum, we grind down the imperfections and give your floor a buffed, cleaned look. On the higher end, we can give it a mirror like shine to where you can see your reflection in it (think Costco floor look). And everything in between.

We start out by patching any cracking, then move on to the grinding process. A higher level of shine is achieved with every pass our machines take.  Once the required level of shine is achieved, we go ahead and seal that floor to protect it against spills, stains and the like.
​
Our concrete polishing pricing start out around $3.50 per square foot. Don't hesitate to reach out to us if you are considering polishing your concrete floors.

Office cubicle became very popular back in the 1990's, but were slowly phased out over the past 20 years. Thanks to covid-19 though, the office cubicle is making a big comeback. Companies and governmental agencies alike are now retrofitting their office space with cubicles in an effort to maintain social distancing.
The idea behind removing the cubicles back in the early 2000's was to promote office space comradery where office staff would work together more as a team because of their proximity to one another. We are now witnessing a reversal in the thought process. Proximity in office space is no longer a good thing if we want to make sure that employees maintain social distancing from their co-workers. It is safe to say that office partitions will become the new norm.

​Interlocking pavers add beauty and style to any outdoor setting, be it a backyard, a restaurant outdoor seating area, or an office or home driveway. Interlocking pavers come in a wide variety of colors, sizes and shapes and they interlock together to create a mosaic floor that is both pleasing to the eye and durable to last you many years to come.
Many hardscape projects benefit from incorporating pavers because of their stunning beauty and ability to blend with other segments of the design. Among the most common uses of pavers are:

• Patio
• Driveway
• Around the pool
• Walkways

The cost of interlocking pavers ranges from $9 to $12+ per square foot, and that depends mostly on the design and colors you pick. While you may be able to find cheaper prices, be ware that improperly installed pavers lead to problems in no time. Poor workmanship in paver laying leads to settling pavers which in turn creates an uneven surface with dips that are unsightly and allows water to puddle.
Proper paver installation requires several steps, highlighted below:

1. Survey the area and determine the levels to make sure your paver surface will come out sloped in the right direction. 
2. Excavate the area 5" to 8" deep (more for driveways), depending on the usage of the area.
3. Lay your roadbase and compact it into  a 4" layer. You may need to lightly spray water onto the roadbase to achieve proper compaction.
4.  Install suitable edging.
5. Lay coarse sand and screed it to uniform 1" thickness. It is best to use 1" screed pipes as guides in order to maintain a uniform 1" thickness.
6. Lay the pavers starting at the longest side and working your way one row at a time.
7. Tamp down the pavers with plate compactor (running on low power setting).
8. Sweep polymeric sand into the joints.
9. Tamp again lightly, one pass will do here.
10. (optional) Seal your pavers with a sealer that gives you the look you want.

If you are looking to enhance the look of your driveway, your patio, or your business courtyard, interlocking pavers are an excellent and cost effective way to give you that stunning look you are looking for.

A kitchen remodel can set you back a pretty penny so you must prepare well for it. First and foremost you need to decide what your budget is and stick to that budget.  I cannot tell you how many clients I came across that wanted to have a 'simple' kitchen remodel, ended up upgrading everything, including the kitchen sink (pun intended). Once you've determined what it is exactly you want out of your kitchen remodel, start your hunt for reputable and LICENSED contractors. There are plenty of horror stories of kitchen remolding jobs gone awry, from gas leaks to plumbing issues, and everything in between. Hiring a licensed contractor basically guarantees that the job will be done correctly and that if any issues arise, the contractor will be back to fix it.
Once your scope of work is defined, and you know all your requirements (type of countertop, sizes, cabinets types, flooring requirements, etc.), it's always healthy to get two to three quotations before you select your contractor. Make sure to read reviews about your contractor before signing up with them!
Before you sign on the dotted line, make sure that the price and scope of work are very well defined. The California Contractors State Licensing Board (CSLB) forces licensed contractors to include certain minimum requirements on their home improvement contracts, make sure yours includes the same. The main ones are:

• Home improvement contract must be defined
• Payment schedule must show each payment and when that payment will be due
• Materials and services to be rendered must be detailed

For example, the contract should not say 'replace countertop'. Instead, it should say ' replace countertop with a brown quartz countertop. Another example, use 'replace sink with a 36" stainless steel apron sink' instead of 'replace sink'.
One item often forgotten by clients is to ask for flooring / wall tile and countertops to be sealed as part of the contract. Make sure your contract includes for that. Otherwise your contractor will have to charge you for it beyond what the home remodeling contract price is.
​

Hardwood flooring is a much sought after flooring in both residential and commercial renovations because of it's beauty, warmth and durability. The price range to install hardwood flooring is from $6 to $20+, depending on the type of hardwood you select. Other factors play into the price, such as the size and shape of the floor, underlayment material, and method of installation.
Hardwood flooring comes in two main types, solid wood and engineered wood. Solid wood is exactly as it sounds, the entire thickness of the wood plan is made of a single solid piece of wood. Engineered wood on the other had is made of a solid wood top layer sitting on top of layers of solid wood and plywood.
Engineered Hardwood from oak, teak or cherry is a popular type of flooring here in Southern California, with an average cost of installation of $14 per square foot. The advantages of engineered hardwood are:

• can be cheaper than solid wood flooring
• looks and feels exactly like solid wood since the top layer is actual wood
• handles temperature and humidity fluctuations better than solid wood flooring
• resilient / durable flooring
• depending on it's thickness, the top layer can be sanded / refinished